Service area
HVAC Service in Bixby, OK
We serve Bixby homeowners with heating, cooling, and insulation work, Monday through Friday, 8AM to 5PM.
- Licensed #0061973 · Bonded & Insured
- Mon–Fri, 8AM to 5PM
- Photo evidence of every problem we find
100% Satisfaction Guarantee
Our promises, in writing
Service Guarantee
If you are not 100% satisfied with the service we have provided, we will refund all of your money. If our technicians smoke or swear in your home, are not drug tested, do not use floor savers, or leave your home without cleaning up, you do not pay for the service.
Repair Guarantee
We guarantee that repairs on your equipment are fixed right or the repair is free. If a repair fails during the first year, we will repair it again at no charge.
Replacement Guarantee
We guarantee that the equipment we have installed will perform as we have stated. If the system does not heat or cool your home to your satisfaction, we will remove it and return 100% of your investment.
A Replacement Guarantee claim should be raised within the first year and requires properly gathered data from the homeowner across several months' time, reviewed by Tellez Heating and Air, to determine that the system is not performing within reasonable standards.
No Breakdown Guarantee
Once all recommended repairs are performed, if the furnace and/or air conditioner breaks down the winter or summer after the repairs were made, the repair will be made at no charge.
Not covered: acts of God, heat exchangers, compressors, refrigerant (Freon) leaks, and animal damage. Items marked yellow (Caution) or red (Failed) that are not addressed at the visit may void the No Breakdown Guarantee.
Resolving Constant Climate Control Failures and Poor Attic Thermal Barriers for Bixby Homeowners
Are you dealing with an air conditioner that cannot keep up with the intense Oklahoma heat, a furnace blowing cold air during a sudden winter freeze, or drafty rooms caused by failing attic insulation? These climate control failures disrupt your daily life and drive up your utility bills, but our comprehensive diagnostics and thermal upgrades can restore your home's comfort. Call or text Tellez Heating and Air to get honest answers and effective solutions. We answer calls and texts until about 10 PM most nights.
Comprehensive Climate Control and Thermal Efficiency Services in Bixby
Air Conditioning Solutions
We resolve cooling failures and optimize airflow to ensure your living spaces remain comfortable and energy-efficient during the most intense summer heat waves.
Heating & Heat Pump Solutions
Our technicians address erratic temperatures, mechanical wear, and ignition failures to keep your property warm and safe throughout sudden winter freezes.
- Furnace Repair
- Furnace Installation
- Furnace Replacement
- Heating Maintenance
- Thermostat Installation
- Heat Pump Repair
Preventative Maintenance
We provide proactive system evaluations and priority care to catch minor wear and tear before it develops into an expensive total breakdown.
Attic Insulation Solutions
We eliminate drafts and prevent thermal transfer through your roof, significantly reducing the workload on your climate control equipment year-round.
Why Bixby Homes Struggle With Climate Control and Energy Loss
The Impact of Extreme Heat on Cooling Equipment
The most common issue we see in local homes is cooling equipment burning out prematurely due to the stress of operating constantly in upper 90s and 100-degree temperatures. When the ambient temperature outside climbs, your system struggles to reject the heat it absorbs from inside your house. This continuous thermal battle forces the compressor to run at maximum capacity for hours on end without a break.
The high humidity in Oklahoma compounds this problem by forcing these systems to work twice as hard just to remove moisture from the indoor air. An air conditioner must first dehumidify the space before it can effectively lower the ambient temperature on your thermostat. This heavy latent heat load accelerates the wear on critical moving parts and electrical components.
Accelerated Wear on Vital System Components
Constant operation under extreme environmental stress takes a severe toll on blower motors, dual run capacitors, and outdoor condenser fan motors. A capacitor that is exposed to intense heat will slowly lose its ability to hold a charge, eventually failing to provide the necessary torque to start the compressor. When these electrical components degrade, the mechanical parts they support are forced to pull excessive amperage.
Drawing too much electrical current causes wires to overheat and contactors to pit, creating a cascade of mechanical failures inside the outdoor cabinet. What begins as a minor inefficiency quickly escalates into a locked rotor or a completely burnt-out compressor motor. Proactive intervention is the only reliable way to stop this chain reaction before it ruins the entire unit.
The Hidden Cost of Inadequate Thermal Protection
Another major factor driving up utility bills and causing equipment failure is inadequate thermal protection in the upper levels of the house. During the peak of summer, radiant energy from the sun bakes your roof deck and pushes extreme heat down into the attic space. If your thermal barrier is degraded or compressed, that trapped heat easily radiates right through the ceiling drywall and into your living spaces.
When the barrier between your roof and your ceiling fails, your cooling equipment is forced to run continuously just to maintain a baseline temperature. The system ends up fighting a losing battle against the constant downward flow of radiant heat, resulting in massive utility spikes and uneven room temperatures. Upgrading this protective layer stops the heat transfer at the source and gives your equipment a much-needed break.
The Science of Proper Attic Air Sealing
Adding blown-in material is only part of the equation when upgrading your thermal envelope. Before any new material is introduced, it is critical to seal the hidden air leaks that allow conditioned air to escape into the upper levels of the house. Gaps around recessed lighting fixtures, plumbing stacks, and electrical wire penetrations act like small chimneys that constantly siphon away your comfort.
When these bypasses are left unsealed, your blower motor has to work continuously to replace the conditioned air that is lost through the ceiling. Proper air sealing stops this convective heat loss, instantly improving the overall efficiency of your ductwork and living spaces. Combining thorough air sealing with a deep layer of blown-in material creates an impenetrable barrier against the outside elements.
The Mechanics of Winter Heating Vulnerabilities
These environmental pressures mean that minor inefficiencies rarely stay minor for long, especially when the seasons change abruptly. A slightly underperforming gas unit or heat pump will often fail completely as soon as the first major winter ice storm hits the region. The sudden drop in temperature demands immediate, high-capacity performance from equipment that has already been worn down by the summer heat.
Because the equipment never truly gets an off-season in our climate, dirt and debris from summer operation often interfere with winter ignition sequences. A dirty flame sensor or a clogged burner assembly will lock out the control board, leaving you without heat during a freezing night. Regular operational checks ensure that these critical safety mechanisms function perfectly when the cold weather arrives.
Heat Pump Efficiency During Cold Snaps
Homes relying on electric heat pumps face unique challenges when the outdoor temperature drops below freezing. These systems extract ambient heat from the outside air, but as the temperature plummets, there is simply less thermal energy available to harvest. The system must run longer cycles and eventually rely on auxiliary electric resistance strips to keep the indoor temperature stable.
If the outdoor coil is dirty or the reversing valve is sticking, the system will struggle to defrost itself, leading to a solid block of ice forming on the condenser. This completely halts the heat transfer process and forces the emergency heat to run constantly, which causes your electric bill to skyrocket. Proper refrigerant charge and clean coils are absolutely essential for efficient winter operation.
Regional Consistency in Climate Challenges
The combination of high humidity, triple-digit heat waves, and freezing winter storms creates a uniquely hostile environment for residential climate control systems.
Addressing these regional challenges requires more than just swapping out broken parts when they finally fail. It demands a holistic approach that looks at the overall thermal envelope of the house, the airflow dynamics of the ductwork, and the electrical health of the machinery. By treating the home as an interconnected system, we can resolve the root causes of poor performance.
Why Bixby Customers Choose Our Professional Approach
A Foundation of Family and Local Expertise
Founded in 2009 by Julio Tellez, Tellez Heating and Air was built on the principle of providing real knowledge and a personal touch to every homeowner we serve. We understand that inviting a technician into your home requires trust, which is why we focus on clear communication and respectful service. Our deep roots in the community mean we treat every service call with the dedication we would expect for our own families.
We maintain strict professional standards to ensure your complete peace of mind on every single project. We are fully licensed, bonded, and insured. You can rest easy knowing that experienced, highly qualified experts are managing your climate control needs.
Visual Proof and Total Transparency
We believe in total transparency, which is why our technicians provide photo evidence of every issue they uncover inside your system. You will never have to guess what you are paying for or wonder if a repair is truly necessary. We show you the exact failing component, explain the root cause of the breakdown, and discuss the mechanical implications before any work begins.
This visual documentation allows you to see exactly what we see, whether it is a burnt contactor, a cracked heat exchanger, or depleted attic insulation. By educating you on the condition of your equipment, we empower you to make informed decisions about your property. We want you to feel completely confident in the solutions we recommend for your home.
Zero Pressure and Complete Answers
We know that investing in a new system or paying for a major repair is a significant expense that requires careful consideration. That is exactly why we strictly enforce a no-high-pressure sales policy across our entire organization. Our goal is to solve your problem and restore your comfort, not to force you into purchasing equipment you do not need.
Our technicians take the time to lay out all available options, from simple component replacements to comprehensive efficiency upgrades. We stay on site until you are completely satisfied and every single question you have is answered thoroughly. You control the pace of the decision-making process from start to finish.
Making Comfort Accessible and Affordable
Upgrading your home's thermal efficiency or installing a brand-new mechanical system should never be a source of financial stress. We offer free estimates on new equipment so you can accurately plan your budget without any upfront diagnostic fees. We charge one flat service fee, and we tell you the amount up front when you call, so there are no surprises.
To make large projects more manageable, we offer flexible financing options through GoodLeap and Synchrony. These financing plans allow you to address critical failures immediately while spreading the cost out over time in a way that fits your budget. We work with you to find the most cost-effective path to lasting indoor comfort.
The Value of Proactive System Care
The most effective way to avoid sudden breakdowns and extend the lifespan of your equipment is through consistent, professional maintenance. Our comprehensive maintenance plans include priority scheduling, ensuring you jump to the front of the line during the busiest extreme weather seasons. Service Club members get two precision tune-ups a year (spring AC and fall furnace), 15% off repairs, and priority scheduling.
We perform exhaustive seasonal tune-ups that clean vital components, calibrate electrical draws, and verify proper refrigerant levels. This proactive approach catches minor wear and tear long before it causes a catastrophic failure on a freezing night or a blistering afternoon.
Restore Your Home's Comfort and Efficiency Today
Dedicated to Your Year-Round Protection
Our team is deeply committed to keeping your Bixby home protected from Oklahoma's extreme weather fluctuations year-round. Whether you need a rapid mechanical fix for a failing compressor, a full system upgrade, or a comprehensive thermal barrier installed in your attic, we have the expertise to handle it. We take pride in delivering robust, high-quality solutions that stand the test of time and weather.
Do not let another heat wave or winter freeze compromise your living environment or drain your wallet through exorbitant utility bills. By addressing both the mechanical health of your equipment and the thermal envelope of your property, we work toward a more comfortable, efficient home. Take the first step toward stable, reliable climate control right now.
Schedule Your Diagnostic Visit
It is time to stop struggling with erratic indoor temperatures and start enjoying a perfectly balanced living space. Reach out to our professional team today to schedule your comprehensive system evaluation and experience true local expertise.
When an emergency strikes, call or text us; evenings and weekends are for emergencies and carry an additional fee. Call or text Tellez Heating and Air for the honest answers you deserve. We answer calls and texts until about 10 PM most nights.